MEGATRON ICS SERİES
Ürün Adı
MEGATRON ICS
Kategori
Sensör Teknolojileri, Açı Sensörleri
,Artımlı Enkoder (Incremental Encoder)
Marka
Endüstri
Alternatif Enerji Demir Yolları Döner Kapılar Fabrika Otomasyon Gıda Makinaları Havacılık İnşaat & Tarım Medikal Otomotiv Sanayi Petrol & Gaz Robot Teknolojileri Savunma Sanayi Tekstil Sanayi Telekomünikasyon Vinç Sanayı Yarıiletken Sanayi
Sipariş Kodu
MEGATRON ICS SERİES
ÜRÜN DETAYLARI
MEGATRON ICS SERİES
- The LS7083/4N allows incremental shaft encoders to drive standard up/ down counters. Connect the encoder quadrature outputs to the A and B inputs. The LS7083N outputs can connect directly to the up and down clock inputs of counters such as 74193 or 40193. The next generation Encoder to Counter Interface chips are now available and recommended for new applications (DIP package, LS7183N / LS7184N, or SOIC package, LS7183N-S / LS7184N-S ).
- x1 or x4 resolution multiplication
- TTL and CMOS compatible
- Low current (micro-amps)
- 8-pin DIP package
- No external clocks required
- Drive standard Up/Down counters
- Monolithic CMOS
- The LS7166 is a CMOS, 24-bit counter that can be programmed to operate in several different modes. The operating mode is set up by writing control words into internal control registers. There are three 6-bit and one 2-bit control registers for setting up the functional circuit characteristics. In addition to the control registers, there is a 5-bit output status register that indicates the current counter status. The IC communicates with external circuits through an 8-bit three state I/O bus. Control and data words are written into the LS7166 through the bus. In addition to the I/O bus, there are a number of discrete inputs and outputs to facilitate instantaneous hardware-based control functions and instantaneous status indication.
- Programmable count modes
- DC to 25MHz count frequency
- 8-Bit I/O Bus for P communication and control
- 24-Bit comparator for pre-set count comparison Readable status register
- Input/Output TTL and CMOS compatible
- 3V to 5.5V operation
- 20-pin DIP
BAŞLICA ÜRÜNLER
-
Etik Çalışma prensibi ve
Müşteri Memnuniyeti -
Güvenilir Marka
Ürünleri -
Ortak Mühendislik
Çözümleri -
Genç ve Dinamik
Kadro